Good morning, everyone, and welcome back to another day of post-release inspiration with Papertrey Ink! Today we're featuring Dash Away All. Before I jump in, I would like to take a moment to thank all of you for your enthusiasm for this set and your patience while the die is re-manufactured (they should be ready to ship out later this week). I am hopeful that as soon as this set lands on your doorstep it will become a favorite of yours just as it has become a favorite of mine. Ok! Enough chit-chat. On to the project!
I began today's card by creating a vellum mask using the Mix & Mat: Snowflakes set. I sponged Spring Rain and a tiny bit of Dark Indigo (mostly around the edges) ink through that stencil. Then, I used the scalloped border from the same Mix & Mat set to add the detail around the sponging. I trimmed down that panel and set it aside.
Next, I stamped and die cut the reindeer. I used Fine Linen and Classic Kraft inks on the body and then added the nose in Scarlet Jewel. I also die cut and stamped one of the ornaments from Very Merry to hang from the reindeer's antler. I used silver embroidery thread to connect the two. I like that small metallic element.
Then, I heat embossed the Keep It Simple: Joyeux Noël sentiment onto a Scarlet Jewel Banner Style shape. The beauty of clear stamps (well, one of them) is their flexibility, so I was able to curve the sentiment to fit on the die cut. I backed it with Bitty Big: Scarlet Jewel gingham for a bit of contrast between the two pieces. I also used the Woodgrain Impression Plate to add texture to a Spring Rain card base.
Once all of my separate elements were complete it was time to assemble my card. I trimmed the bottom of my snowflake panel to match the Banner Style curve and adhered the two together. Then, I used foam tape to attach them to the card base. I also used foam tape to adhere my reindeer into place. Then, I added a sprinkling of clear sequins (from the Sunshine & Rainbows Make It Market Mini Kit) around the reindeer on the snowy panel. I feel like this card has just enough sparkle and texture while still being nice and simple.
Good morning, friends, and welcome back for another day of Papertrey Ink October post-release inspiration! I have a couple of treat boxes to share with you today featuring Heather's new Traveler's Journal: December and Traveler's Journal: December Words stamp sets.
Heather has cleverly designed these sets to work beautifully for your December mini books, but other projects as well. I'm not much of a mini book maker, but I love the trees and mittens and labels and snowflakes and sweet seasonal sentiments in these sets. I'm sure I'll be pulling them out for my little gift boxes this year!
I started with the Christmas tree Truffle Tote, so let's look at that one first. I began die cutting a box (two pieces) from white cardstock. I stamped my trees on the front using Dark Chocolate for the trunks and Limeade Ice, New Leaf, and Green Parakeet for the bodies. Then, I added the ornaments using Pure Poppy. Next, I stamped the rest of the open space on both die cut pieces with the smallest snowflakes in the set using Spring Rain ink. Then, I assembled the box.
Next, I stamped the label onto white cardstock using Pure Poppy ink and added the sentiment from the December Words mini in Dark Chocolate ink. I trimmed that out and used a Crop-A-Dile to add a hole to one end before tying it to the tote handle with baker's twine. My box still needed a bit of sparkle, so I xyroned a strip of cardstock and die cut it (sticky side up) with the Cover Plate: Waves die. I used one of the waves to create a glittered snow bank along the bottom edge of the box. I also used Ruby Slippers Nuvo drops to give my ornaments a bit of sparkle. I almost want to make truffles just so I have an excuse to make more of these boxes!
Next up is the Let It Snow gable box.
When I saw the Dark Indigo Bitty Big paper I knew immediately that I wanted to make a gift box. I love that color (so, so, so much) and the gingham pattern is one that I think works well for the gentlemen in our lives. Between family and friends I have plenty of fellas on my gift list, so now is as good a time as any to get a jump on it, right? I cut my gable box pieces from the paper and assembled the box with Score-Tape. It's my go-to for treat boxes.
Then, I stamped the labels in Green Parakeet and Spring Rain inks. I added the sentiment to the open label using Dark Indigo and trimmed out the labels. Then, I stamped the mittens onto white cardstock using New Leaf ink and trimmed them out too. I used a mix of flat and foam adhesives to adhere all of the elements to the front of the gable box. It about killed me not to put glitter on there somewhere (because Christmas!), but in the spirit of masculine crafting I let it go...this time. Ha!
Good morning, friends, and welcome for more post-release inspiration from Papertrey Ink! The new products are all available on the website, so you can pick them up right now! This morning I'm sharing a project with Betsy's new set, Sing A Song Of Christmas. This is a wonderful set full of beautifully illustrated instruments and festive song lyrics. There are many music lovers in my life and I can imagine this set being perfect for creating their holiday cards. Let's take a closer look!
I began by using the individual musical notes to stamp a tone-on-tone background pattern on a Pure Poppy card base. Next, I die cut a focal panel using the Sentiment Splits: Curve Vertical die. I very lightly sponged it with Aqua Mist and then stamped my sentiment in Pure Poppy.
Then, I die cut a second Curve Vertical panel, this time from White Adhesive Sheets with the sticky side up (though still covered by the backing paper). I peeled off the paper and adhered it to the back of my focal panel, leaving just about an 1/8" peeking out from the underside.
Then, I sprinkled Sterling silver glitter on the exposed adhesive. That gave me a sparkly, glittered mat! I adhered that entire piece to the card front with foam adhesive. Next, I stamped and die cut the fiddle using Green Parakeet, New Leaf, and Smokey Shadow inks. I adhered that to the left of the sentiment, overhanging the curved bottom edge just a bit.
I die cut three of the bow shapes and stamped the top one before layering them together and adhering them to the fiddle. I wanted to tie the silver in a bit more, so I used a fine-tip glue pen to add glitter to the center to each of the stamped snowflakes. This card just makes me so happy!
Good morning, friends! Welcome to Day 5 of the Papertrey Ink October New Release Countdown! I'm here today with one more Dash Away All card to share with you. This one is actually by special request. Kathy Mc asked if I would mind sharing a card using the Wonderland Scenes Stencils with my new set. I had planned on it, but her request was just the push I needed to get these products together. It just so happens they're a fantastic match!
I began by sponging Aqua Mist ink through the birches stencil and then ran it through my Cuttlebug like an impression plate. Then, I stamped the snow (also in Aqua Mist ink) while the stencil was still in place.
Next, I die cut the In The Meadow dies and textured them with the Woodgrain Impression Plate. I love that thing. I used Multi Matte Medium to add a fairly thick bead of adhesive along the top edge of each piece and embellished with the Faux Snow from the Make It Market: Wonderland Trimmings kit. I adhered those, and a strip of Holiday Plaid Patterned Paper, to the card front with flat and foam adhesives. I also tied on a white crochet thread bow.
Then, I die cut and stamped my reindeer. I used a Classic Kraft and Cocoa Bean color scheme along with a Pure Poppy nose. I also sponged a piece of white cardstock with Pale Peony ink and die cut that with a Keep It Simple Frames die. I stamped that with a sentiment from Dash Away All in Pure Poppy and stitched it to the card front. Then, I adhered the reindeer into place with foam tape and embellished his nose with Nuvo Ruby Slipper drops. I'm loving this card so much. I may need to make a few more of these to send out this Christmas.
Then I hope you'll tune in to this month's Release Party Live! broadcast at 9pm ET on Sunday evening. I'm running a half-marathon before the broadcast and I'll still be there, so you don't have any excuses! Just kidding! But seriously, I hope you'll join us. See you soon!
Good morning, friends, and welcome back to Day 4 of the Papertrey Ink New Release Countdown. I'm back with another Dash Away All project to share - this time a bit of festive home decor (some of you guessed)! I love dressing my home up for Christmas. It's truly one of my very, very favorite things to do and I'm always thinking about new ways to keep things fresh and fun. I thought the reindeer in Dash Away All would make a fantastic garland! Let's take a closer look!
This garland came together remarkably quickly thanks to some assembly line stamping. I began by die cutting all of the reindeer from white cardstock. I stamped each one with the main body of the reindeer in Classic Kraft ink sponged with Cocoa Bean.
Next, I added the noses in Smokey Shadow. Then came the wreaths around their necks. That small image is actually one of the accents in Betsy's Tag Along stamp set from last month and it fits so perfectly is almost like she read my mind. I stamped those in Olive Twist and then used the nose image a second time to stamp berries in Pure Poppy. Then, I used Ruby Slipper Nuvo glitter drops to embellish each berry.
I set those aside to dry (maybe a half hour) before stringing alternating reindeer and white pom-poms onto invisible thread. The holes in the antlers make this super easy and then you don't have to worry about mangling your reindeer as you thread them together. I used a beading needle (long and thin) because I wanted to be able to get though the pom-poms easily and it was perfect. Just a note: Invisible thread is a little finicky, so you're going to want to be careful not to let it get tangled. I would suggest hanging your garland straight down from a hook or nail in the off-season rather than try to bundle it up and pack it into a box. Trust me.
I am so tickled with this garland! I did two dozen reindeer because our mantel is so wide, but it would also be super cute to do a shorter one with eight black-nosed reindeer and one red-nosed reindeer. Or use them as spacers between letter pennants (for example: spell out "believe" and alternate each letter with a reindeer). I have so many more ideas for garlands! I'm going to have them hanging from everything!
I hope you've enjoyed today's post! I'll be back tomorrow with another Dash Away All project to share. In the meantime, you'll definitely want to visit Nichole, Betsy, Dawn, Heather, Michelle, and Stephanie. See you soon!